Linkage and Hardware
Part # 750-300-0200
3" Oscillating Arm
This arm is 3" center to center with a 5/16" hole.
Part # 750-300-0030
4" Main Drive Oscillating Arm
This arm is 4" from center to center and has a 3/8" hole in one end.
Part # 750-300-0004
Main Drive Linkage
This tubing is used when a custom length is needed. Cut tubing to desired length
and weld threaded insert into end of tubing.
This end mounts to the gearbox.
Part # 750-300-0020
Special 3/8 Rod End Bearing
This rod end bearing housing is Stainless Steel with a two piece
silicone bronze housing.
Part # 750-300-0010
Ball Bearing Kit
This kit is for the Main Drive Linkage at the gearbox connection.
It includes 2 bearings, spacer tube, snap ring and all hardware
to rebuild the unit.
Part # 750-300-0011
Retainer Ring / Stainless Steel
Part # 750-300-0201
Linkage Bolt Assembly / Long
5/16-24 x 2 1/2 SS bolt with nut and special washers.
Part # 750-300-0202
Linkage Bolt Assembly / Short
5/16-24 x 1 3/4 SS Bolt with nut and special washers.
Part # 750-300-0210
Special Washer 5/16"
5/16" ID. Stainless Steel.
Part # 750-300-0310
Special Washer 3/8"
3/8" ID. Stainless Steel.
Part # 750-900-0003
Blind Insert, Stainless Steel, 3/8" x 16".
This threaded insert is used on all support headers under the white bushing
blocks. Order 750-900-0004 for insert with installation tool.
Part # 750-300-0110
5/16" Rod End Bearing, Stainless Steel.
Linkage Tube with Rod End Bearings.
+You will need to specify the length of the tube.
This item is available in many lengths
+Please measure the length of the linkage
from center to center with the Rod End.
Bearings attached as pictured below. Then
select the correct part #.
This picture is the full assembly with Rod End
Linkage Tube 4" from center to center.
Part # 750-300-0104
Linkage Tube 5" from center to center.
Part # 750-300-0105
Linkage Tube 6" from center to center.
Part # 750-300-0106
Linkage Tube 7" from center to center.
Part # 750-300-0107
Linkage Tube 8" from center to center.
Part # 750-300-0108
Linkage Tube 10" from center to center.
Part # 750-300-1110
Linkage Tube 11" from center to center.
Part # 750-300-1111
Linkage Tube 14" from center to center.
Part # 750-300-1114
Part # 750-300-0100
Universal Linkage Tube
This linkage is used when a custom length is needed.
Cut tube to the desired length and weld threaded insert into the end of tubing.